top of page

Furnace Maintenance


Schenectady NY Home Inspector Furnace Maintenance
Furnace Maintenance

Heating systems are often trouble-free and simple to keep. Efficient performance is a part of good routine upkeep. Regardless of which kind of furnace you have, there are numerous things you can do to maintain your heating system in prime shape. In the following guide, we'll inform you just how you can support and troubleshoot your furnace, irrespective of the kind.


When a heating or cooling system malfunctions, one of its elements might be causing the issue.


The furnace or air conditioner could have lost electricity. Fuel might not be hitting the device. Or, in case the fuel is oil or gas, it might not be igniting. If the furnace or air purifier works but the heat or cool air is not reaching the rooms in your house, the issue is very likely to be the blower or supply system. A faulty thermostat can also continue to keep the machine from turning or could make it turn off and on.


No matter the issue, begin with the easiest procedures. Typically, all it takes is patience and common sense. Before you work on a heating or cooling system, consider these preliminary steps:


  • Make certain the unit is getting power. Start looking for blown fuses or tripped circuit breakers at the primary entrance panel. Some furnaces have another electricity entry, typically located at another panel close to the primary entrance panel. Some furnaces have fuses mounted on the device.

  • When the device has a reset button, marked RESET and close to the engine casing, wait 30 minutes to allow the motor cool, then press the button. If the unit doesn't start, wait 30 minutes and then press the reset button again. Repeat at least once more.

  • When the device has another power switch, be sure that the switch is switched on.

  • Check to be certain that the thermostat is correctly set. If needed, increase (or, for a air conditioner, lower) the atmosphere by 5º.

  • When the device employs gasoline, check to ensure that the gas supply is switched on and the pilot light is lit. In case it uses petroleum, check to be certain there's an adequate source of petroleum.


There are also several other significant factors to consider:


  • Before performing any work on any sort of heating or cooling system, be sure all power to the machine is switched off. In the key electrical entry panel, trip the circuit breaker or remove the fuse that controls the power to the device. If you are not certain which circuit the machine is on, then remove the main fuse or trip the primary circuit breaker to cut off all electricity to the home. Some furnaces have another electricity entry, usually at another panel close to the primary entrance panel. If another panel is present, remove the fuse or trip the breaker there.

  • When the fuse blows or the circuit trips when the furnace or air conditioner turns on, there's an issue in the electrical system. In cases like this, don't attempt to repair the furnace. Call a professional support person.

  • When the device employs gas and there's a smell of gasoline in your house, don't attempt to close the gas or turn any lights on or off. Escape the home, leaving the door open, and call the gas company or the fire department to report a leak. Don't reenter your house.

  • To maintain your heating and cooling system in prime shape, have it cleaned once per year. The ideal time to have a furnace serviced is at the very end of the heating season.

Follow these tips and you can keep your home comfortable year-round!



The Author Schenectady NY Home Inspections LLC is a locally owned and family operated Home Inspection Company. Schenectady NY Home Inspections is located in Schenectady NY and has performed over 6500 Inspections Book online

Phone: 1-800-603-5194


14 views0 comments

Recent Posts

See All
bottom of page